Maintenance

About This Plugin

This plugin lets you activate a maintenance mode on your Paper, Velocity, Bungee, and Sponge server, which will prevent players without a permission to join the server.

LEGACY TEXT FORMATTING (§a/&a) IS NOT SUPPORTED LEGACY TEXT FORMATTING (§a/&a) IS NOT SUPPORTED

* Use https://webui.adventure.kyori.net/ to preview parsed components * You can find full documentation on the format (including normal colors and formatting, rgb, click/hover events, and more) here: https://docs.adventure.kyori.net/minimessage/format

Its features include:

* A messages are editable as well as messages are editable, that will be shown during maintenance * messages are editable, which will messages are editable * messages are editable which will enable maintenance, then disable it after a given amount of time * A '%TIMER%' variable usable in the pingmessage, to show the time until a running endtimer finishes *(other variables and tricks are explained in the configuration file's comments)* * A messages are editable, to grant specific players the ability to join while you're working on your server * Notifications when players try to join your server during maintenance * Nearly all messages are editable via the language file, given in a multitude of different languages

Using ServerListPlus * Only want to enable Using ServerListPlus? You can also do so by using the `/maintenance <on/off> <servername>` command * Link Using ServerListPlus connection, so you don't have to enable/disable maintenance on each proxy by hand * Using ServerListPlus during full proxy maintenance, as well as Using ServerListPlus to go to when a single proxied server is under maintenance * Using ServerListPlus? Maintenance will toggle its status when enabling maintenance and reenable the SLP motd when disabling maintenance * Want to have PlaceholderAPI placeholders on Paper? See Using ServerListPlus for more information on the MaintenanceAddon.

*Want to know a secret?* You can have text left of the server icon by just adding a lot of spaces to the playercountmessage, like so: ```yaml playercountmessage: "Maintenance AAAA" ```

IMPORTANT: If using the plugin on a Paper server, the plugin ProtocolLib is required to use Maintenance to its full extend.

Issues/Support

Did you find a bug? Use the **issue tracker** Other questions or problems? Join the support Discord guild ✨

German Plugin Tutorial @YouTube

Commands

*Arguments in < > are necessary, those in [ ] aren't (can be omitted).*

* /maintenance dump will set the status of the maintenance mode * /maintenance dump reloads the config and maintenance-icon file * /maintenance dump allows specific players to join on the server when maintenance is enabled * /maintenance dump returns a list of all players on the * maintenance whitelist * /maintenance dump will enable maintenance mode after the time is up * /maintenance dump will enable maintenance mode for the given time in minutes. After the time is up, it'll be disabled again * /maintenance dump will enable maintenance mode after the given time, then disable it according to the second parameter * /maintenance dump cancels a running start-/endtimer * /maintenance dump sets a motd for maintenance mode * /maintenance dump lists the currently set maintenance motds * /maintenance dump remotely downloads the newest version of the plugin onto your server * /maintenance dump dumps some server information, used for bug reports

Permissions

* maintenance.joinnotification - super permission, that grants access to all perms below * maintenance.joinnotification - join the server during maintenance * maintenance.joinnotification - use the "/maintenance" command (also required to use the subcommands) * maintenance.joinnotification - use the "/maintenance <on/off>" commands * maintenance.joinnotification - use the "/maintenance reload" command * maintenance.joinnotification - use the "/maintenance <update/forceupdate>" commands * maintenance.joinnotification - use the "/maintenance <starttimer/endtimer> <minutes>" and "/maintenance timer abort" commands * maintenance.joinnotification - use the "/maintenance add <player>" command * maintenance.joinnotification - use the "/maintenance remove <player>" command * maintenance.joinnotification - use the "/maintenance whitelist" command * maintenance.joinnotification - use the "/maintenance setmotd <index> <1/2> <message>" command * maintenance.joinnotification - use the "/maintenance motd" command * maintenance.joinnotification - use the "/maintenance dump" command * maintenance.joinnotification - if enabled: sends a notification to you if a player tries to join the server while maintenance is enabled

Extra permissions for the Velocity/Bungee part:

* maintenance.singleserver.status*maintenance.singleserver.status* - join the proxied server during maintenance * maintenance.singleserver.status - use the "/maintenance <on/off> <server>" commands * maintenance.singleserver.status - use the "/maintenance <starttimer/endtimer> <server> <minutes>" and "/maintenance timer abort <server>" commands * maintenance.singleserver.status - use the "/maintenance status" command

IMPORTANT - If you are using the plugin on your proxyserver: You have to have these permissions on the proxy, not on the backend servers! The best way of doing this is using a proper permissions plugin on the proxy (for example LuckPerms).

Configuration

If you are using *the Paper version of the plugin*, you have to have **ProtocolLib** installed to use the custom server-icon and the playercount-messages (that, or you have Paper running on 1.12.2 or higher)! The rest however is also accessible without it. For the Velocity/Bungee version you don't need to have any other plugins installed.

*proxied-maintenance-servers*, *fallback* and *mysql* section are only for the Velocity/Bungee version.

```yaml

Enables maintenance mode.

maintenance-enabled: false

Enables maintenance on certain servers managed by your proxy instance(s).

proxied-maintenance-servers: - PaperServer1

- AnotherServer

If maintenance is enabled on a proxied server with players on it, they will be sent to the fallback server instead of being kicked off the network.

If the fallback server is not reachable/not set, they will just be kicked off the network.

This can also be set to an array to set multiple fallback servers, in case one server is not always reachable: 'fallback: [s1, s2, s3, ...]'

fallback: lobby

If maintenance is enabled globally, you can define a "waiting" lobby for players to be sent to instead of being kicked.

Leave this empty to disable.

waiting-server: ""

The message shown in the multiplayer server list motd when maintenance is enabled.

If you put in multiple entries, one of them will be chosen randomly on every ping.

If running an endtimer, the time left can be displayed by including '%TIMER%' in a pingmessage (also works in playercount(-hover) message).

pingmessages: - "<red>Currently under maintenance<br><gradient:#fbffc2:#0fffff>We will be back soon!"

- "Other entry"

enable-pingmessages: true

Any extra commands inside the arrays will be executed when maintenance is enabled/disabled.

Example: commands-on-maintenance-enable: ["say hello!", "stop"]

commands-on-maintenance-enable: [] commands-on-maintenance-disable: []

If set to true and an endtimer is currently running, a pingmessage from this pool will be chosen

instead of the ones above, so you can have different messages for when an endtimer is running/not running.

enable-timerspecific-messages: true timerspecific-pingmessages: - "<red>Currently under maintenance<br><gradient:#fbffc2:#fffff>Come back in:</gradient> <color:#aa55ee>%TIMER%"

- "Other entry"

If set to true, the message below will be shown in the top right corner of the server in the serverlist, where the playercount would normally be displayed.

If set to false, the normal playercount will be shown.

#

Alternatively you can use '%ONLINE%' and '%MAX%' if you want to include the playercount in a custom message (e.g. "Maintenance %ONLINE%/%MAX%").

DOES NOT SUPPORT RGB!

enable-playercountmessage: true playercountmessage: "<dark_red>Maintenance"

Is shown when you move your mouse above the text in the top right corner of the server in the serverlist,

where the playercount would normally be displayed.

DOES NOT SUPPORT RGB!

playercounthovermessage: "<red>Currently under<br><red>maintenance"

If set to true, the server icon will be changed to the 'maintenance-icon.png' file in the plugin's folder during maintenance.

custom-maintenance-icon: false

If set to true, players with the 'maintenance.joinnotification' permission will receive a message,

that a player tried to join the server while maintenance is enabled.

send-join-notification: false

Set this to false if you do not want players to be kicked when you enable maintenance (new connections will still be blocked).

... I don't know why you would want that, but you can disable it. :p

kick-online-players: true

Changes the language of command feedback/messages.

If you find missing translations or want to contribute a new language file, you are very welcome to message me on the Paper forums or my Discord server! :)

Currently available are: en (English), de (German), fr (French), pt (Portuguese), es (Spanish), ru (Russian), zh (Chinese), it (Italian), pl (Polish)

language: en

If you have 2 or more proxy instances, the database connection will make sure all proxies

have the same maintenance status, so you won't have to enable/disable it on every proxy by hand.

mysql: use-mysql: false host: host port: 3306 database: database username: username password: password

Requests to the database will only be made at least x seconds after the last request,

so there won't be a request on every single ping on a server with many players.

#

Set this to 0 to make a database request on (almost) every single ping.

(0 is not recommended if having more than a hundred concurrent players, then I'd recommend keeping it from 10-60).

update-interval: 15

If you for some reason cannot establish SSL connections to your database, you may disable it here (not recommended).

use-ssl: true

If enabled and the server is restarted while running an endtimer, the timer will be continued after the restart.

If the timer ends while the server is offline, maintenance will be disabled as soon as the server starts again.

continue-endtimer-after-restart: enabled: false

This value is set everytime an endtimer is started, cancelled or ended.

Do not manually change this value.

end: 0

If using the timer command: In what intervalls before enabling/disabling maintenance there will be a broadcast.

timer-broadcast-for-seconds: [1200, 900, 600, 300, 120, 60, 30, 20, 10, 5, 4, 3, 2, 1]

If disabled, you will no longer receive any messages if there is an update.

Not recommended to disable, as new versions generally tend to run better and with fewer bugs.

However, you can always check for updates manually using the '/maintenance update' command.

update-checks: true

Used for autoupdating the config, do not change this value.

config-version: 6

```

```yaml

Messages containing the placeholder "<prefix>" will have it replaced with the following string

prefix: "<dark_gray>[<yellow>Maintenance<dark_gray>] " noPermission: "<red>You do not have the permission to execute that command." kickmessage: "<red>The server is currently under maintenance!<br>Try again later!" maintenanceActivated: "<prefix><gold>Maintenance mode is now activated." maintenanceDeactivated: "<prefix><gold>Maintenance mode is now deactivated." alreadyEnabled: "<prefix><red>Maintenance is already enabled!" alreadyDisabled: "<prefix><red>Maintenance is already disabled!" endtimerBroadcast: "<prefix><gray>Maintenance mode will be disabled in <gold>%TIME%<gray>." endtimerStarted: "<prefix><green>Started timer: <gray>Maintenance mode will be deactivated in <gold>%TIME%<gray>." starttimerBroadcast: "<prefix><gray>Maintenance mode will be enabled in <gold>%TIME%<gray>." starttimerStarted: "<prefix><green>Started timer: <gray>Maintenance mode will be activated in <gold>%TIME%<gray>." scheduletimerBroadcast: "<prefix><gray>Maintenance mode will be enabled in <gold>%TIME% <gray>and will last for <gold>%DURATION%<gray>." timerAlreadyRunning: "<prefix><red>There is already a timer scheduled!" timerNotRunning: "<prefix><red>There is currently no running timer." timerCancelled: "<prefix><red>The current timer has been disabled." timerTooLong: "<prefix><red>The number has to be less than 40320 (28 days)!" timerMotdDisabled: "<prefix><red>You have to set 'enable-timerspecific-messages' in the config to 'true', if you want to use/edit timerspecific motds." motdTimer: "%HOURS%:%MINUTES%:%SECONDS%" motdTimerNotRunning: "-" joinNotification: "<prefix><yellow>%PLAYER% <red>tried to join the server." motdList: "<prefix><gray>List of your maintenance motds:" motdListEmpty: "<prefix><red>You don't have any maintenance motds set!" reload: "<prefix><green>Reloaded config, whitelistedplayers, language file and the maintenance icon." removedMotd: "<prefix><green>Removed motd number %INDEX%." removeMotdError: "<prefix><red>You only have one motd, so you cannot remove any!" setMotd: "<prefix><green>Set line %LINE% of the %INDEX%. maintenance motd to %MOTD%" setMotdIndexError: "<prefix><red>You currently have %MOTDS% motds, so you have to pick a number between 1 and %NEWAMOUNT%." setMotdLineError: "<prefix><red>The second argument has to be the line number (1 or 2)!" updateDownloading: "<prefix><red><bold>Downloading update..." updateFailed: "<prefix><dark_red><bold>Update failed!" updateFinished: "<prefix><green><bold>The update was successful! To prevent issues with tasks and to complete the update, you have to restart the server!" whitelistedPlayers: "<prefix><gold>Whitelisted players for maintenance:" whitelistedPlayersFormat: "<dark_gray>- <yellow>%NAME% <dark_gray>(<gray>%UUID%<dark_gray>)" whitelistAdded: "<prefix><green>Added <aqua>%PLAYER% <green>to the maintenance whitelist!" whitelistAlreadyAdded: "<prefix><aqua>%PLAYER% <red>already is in the maintenance whitelist!" whitelistRemoved: "<prefix><green>Removed <aqua>%PLAYER% <green>from the maintenance whitelist!" whitelistNotFound: "<prefix><red>This player is not in the maintenance whitelist!" whitelistEmpty: "<prefix><red>The maintenance whitelist is empty! Use <yellow>/maintenance add <player/uuid> <red>to add someone!" playerNotFound: "<prefix><red>No player with this name has played on this server before." playerNotFoundUuid: "<prefix><red>No player with that uuid could be found." playerNotOnline: "<prefix><red>There is no player online with that name." invalidUuid: "<prefix><red>Invalid uuid format!"

Messages for the Bungee/Velocity part, you can ignore them if you use the plugin on Paper/Sponge

sentToWaitingServer: "<prefix><red>You have been sent to a waiting server!" forceWaitingServer: "<prefix><red>You cannot leave the waiting server while maintenance is enabled!" serverNotFound: "<prefix><red>No server with this name is registered on the proxy!"

singleTimerAlreadyRunning: "<prefix><red>There is already a timer scheduled for that server!" singleTimerCancelled: "<prefix><red>The current timer for server <yellow>%SERVER% <red>has been disabled." singleTimerNotRunning: "<prefix><red>There is currently no running timer for that server." singleEndtimerBroadcast: "<prefix><gray>Maintenance mode on server %SERVER% will be disabled in <gold>%TIME%<gray>." singleStarttimerBroadcast: "<prefix><gray>Maintenance mode on server %SERVER% will be enabled in <gold>%TIME%<gray>." singleScheduletimerBroadcast: "<prefix><gray>Maintenance mode on server %SERVER% will be enabled in <gold>%TIME% <gray>and will last for <gold>%DURATION%<gray>." singleMaintenanceKick: "<prefix><red>The server %SERVER% is currently under maintenance! Try again later!" singleMaintenanceKickComplete: "<red>The server %SERVER% is under maintenance!<br>You may try to rejoin to go onto another server!" singleMaintenanceActivated: "<prefix><gold>Maintenance mode is now activated on server <yellow>%SERVER%<gold>." singleMaintenanceDeactivated: "<prefix><gold>Maintenance mode is now deactivated on server <yellow>%SERVER%<gold>." singleServerAlreadyEnabled: "<prefix><red>Maintenance is already enabled on server <yellow>%SERVER%<red>!" singleServerAlreadyDisabled: "<prefix><red>Maintenance is already disabled on server <yellow>%SERVER%<red>!" singleServerMaintenanceList: "<prefix><gray>Proxied servers, that have maintenance enabled:" singleServerMaintenanceListEmpty: "<prefix><gray>There are no proxied servers that are under maintenance." singleServerMaintenanceListEntry: "<dark_grey>- <aqua>%SERVER%"

second: "second" seconds: "seconds" minute: "minute" minutes: "minutes" hour: "hour" hours: "hours"

helpHeader: "<dark_gray>========[ <yellow>%NAME% <dark_gray>| <yellow>%PAGE%/%MAX% <dark_gray>]========" helpPageNotFound: "<prefix><red>There is no page with that number!" helpNextPage: "<gray>Use <aqua>/maintenance help %PAGE% <gray>to get to the next help window." helpAbortTimer: "<gold>/maintenance aborttimer <gray>(If running, the current timer will be aborted)" helpEndtimer: "<gold>/maintenance endtimer <minutes> <gray>(After the given time in minutes, maintenance mode will be disabled)" helpStarttimer: "<gold>/maintenance starttimer <minutes> <gray>(After the given time in minutes, maintenance mode will be enabled)" helpScheduleTimer: "<gold>/maintenance scheduletimer <timer minutes> <maintenance duration> <gray>(After the given time in minutes, maintenance mode will be enabled for the given duration in minutes)" helpDebug: "<gold>/maintenance debug <gray>(Enables some debug logging)" helpDump: "<gold>/maintenance dump <gray>(Dumps some server information, used for bug reports)" helpHelp: "<gold>/maintenance help [page] <gray>(Shows this beautiful help window)" helpMotd: "<gold>/maintenance motd [timer] <gray>(Lists the currently set maintenance motds. If specifying 'timer', the timer motds are shown)" helpRemoveMotd: "<gold>/maintenance removemotd [timer] <index> <gray>(Removes a maintenance motd. If using 'timer' as an argument, a timerspecific pingmessage will be removed)" helpSetMotd: "<gold>/maintenance setmotd [timer] <index> <1/2> <message> <gray>(Sets a motd for maintenance mode. If using 'timer' as an argument, a timerspecific pingmessage will be set)" helpReload: "<gold>/maintenance reload <gray>(Reloads the config file, whitelist file and the server-icon)" helpToggle: "<gold>/maintenance <on/off> <gray>(Enables/disables maintenance mode)" helpUpdate: "<gold>/maintenance update <gray>(Remotely downloads the newest version of the plugin onto your server)" helpWhitelist: "<gold>/maintenance whitelist <gray>(Shows all whitelisted players for the maintenance mode)" helpWhitelistAdd: "<gold>/maintenance add <name/uuid> <gray>(Adds the player to the maintenance whitelist, so they can join the server even though maintenance is enabled)" helpWhitelistRemove: "<gold>/maintenance remove <name/uuid> <gray>(Removes the player from the maintenance whitelist)"

Messages for the Bungee/Velocity part, you can ignore them if you use the plugin on Paper/Sponge

helpAbortSingleTimer: "<gold>/maintenance aborttimer [server] <gray>(If running, the current timer will be aborted)" helpSingleEndtimer: "<gold>/maintenance endtimer [server] <minutes> <gray>(After the given time in minutes, maintenance mode will be disabled)" helpSingleStarttimer: "<gold>/maintenance starttimer [server] <minutes> <gray>(After the given time in minutes, maintenance mode will be enabled)" helpSingleScheduleTimer: "<gold>/maintenance scheduletimer [server] <timer minutes> <maintenance duration> <gray>(After the given time in minutes, maintenance mode will be enabled for the given duration in minutes)" helpSingleToggle: "<gold>/maintenance <on/off> [server] <gray>(Enables/disables maintenance mode)" helpStatus: "<gold>/maintenance status <gray>(Lists all proxied servers, that are currently under maintenance)"

Used for autoupdating the language file, do not change this value.

language-version: 1

```

ServerListPlus Integration

If you have the ServerListPlus plugin on your server, Maintenance will toggle its status. If you enable maintenance, the ServerListPlus motd will be disabled and then reenabled, when you disable maintenance to prevent any issues with them overriding each other.

MySQL/Multi-Proxy Support

*Only available in the Bungee/Velocity version!* By enabling MySQL in the config, you can even connect multiple proxy-servers to a set value in your database, so you won't have to enable/disable maintenance on each proxy by hand!

I want to give a small thank you to the people translating messages - you're awesome! French: Zendrique Spanish: Vixo_Ulises Polish: Slasherss and EEEGuba Portuguese: JoaoPinto Russian: En_0t_S Chinese: yeban